第1个回答 2017-01-14
1、启动防火墙的时候按住键盘上的ESC键
2、出现rommon #1>时,输入confreg
rommon #1> confreg
3、会出现下面的文字发:
Current Configuration Register: 0x00000011
Configuration Summary:
boot TFTP image, boot default image from Flash on netboot
failure
Do you wish to change this configuration? y/n [n]:
4、当然是回答“Y”了
5、输“boot”引导机器
rommon #2> boot
6、机器绕开配置启动好后,进enable,用“copy startup-config
running-config”把原来的配置运行起来,
再用下面的命令把密码改了,这次可以记牢了:
hostname(config)# password password
hostname(config)# enable password password
hostname(config)# username name password password、
7、改回register value,不然重启机器配置又没有了
hostname(config)# config-register 0x1
register value默认是0x1
8、千万别忘了保存当前的配置。